Ready Mix Concrete In Harlow From £100 Per Metre
When you buy ready mix concrete from HH Muckers, you only pay for what you need. By selling concrete in cubic metres, we reduce waste and our customers save money.
We pack each order in our concrete plant. Our customers can tell us what ratios and materials they need over the phone.
We load each batch into a volumetric concrete truck.
Our trucks are fully licensed and brand new. They contain compartments for lean, screed, cement, water, ballast, and sand.
Contractors all over Harlow and North London rely on us for 24/7 support. We are one of the only ready mix concrete suppliers that offer emergency deliveries.
We also give our contractors time slots.
Give us a call on 01992 635454 to speak to our friendly team.
Ready Mix Concrete Calculator Harlow
At HH Muckers, we aim to reduce waste.
You only pay for the exact number of cubic metres you need. This helps you save money and enables us to reduce our environmental impact.
Our prices start from £80 per cubic metre.
With our ready mix concrete calculator, you can check your maths. When you have a number in mind call our team on 01992 635454.
Our 24/7 ready mix concrete delivery service helps contractors in an emergency.
Frequently Asked Questions
What locations do your ready mix concrete services cover?
We cover the following locations and surrounding areas.
- Essex – Brentwood, Chelmsford, Chigwell, Epping, Harlow, Loughton, Waltham Abbey
- Bedfordshire – Luton
- Hertfordshire – Bishops Stortford, Broxbourne, Cheshunt, Harpenden, Hatfield, Hemel Hempstead, Hertford, Hitchin, Hoddesdon, Potters Bar, St Albans, Stevenage, Watford, Welwyn
- North London – Edmonton, Enfield, Haringey, Palmers Green, Tottenham, Winchmore Hill, Wood Green, Woodford
What are the benefits of a volumetric concrete lorry?
There are many benefits to ordering a volumetric concrete lorry.
We have invested in new state-of-the-art lorries. They are fully licensed and can carry leed, screed, concrete, and sand.
When you order ready mix concrete, our team pack all the materials you need in one of our lorries. They have separate compartments for each material.
You can order exact ratios from us.
When you order a ready mix concrete delivery from us, you can book a time slot. There are no surprises with our pre-booked appointments.
Our lorries are available for 24/7 deliveries.
Contact us on 01992 635454 to book your time slot.
How our volumetric concrete mixers work
Volumetric concrete trucks are good for contractors who are working on large construction sites. They contain separate compartments for lean, screed, cement, and other construction materials.
Contractors can order lots of concrete grades and strengths from us at once. Our volumetric concrete trucks come complete with in-built mixers. This means that you can stay in control of your batch of ready mix concrete.
Each truck can mix 1 to 10 cubic metres of concrete on each visit.
What is ready mix concrete?
Ready mix concrete is a combination of gravel, sand, water, and cement. It is a type of volumetric concrete.
Contractors all over Harlow and North London use ready mix concrete. It is good for bridges, residential slabs, and industrial projects.
People also call it ready made concrete.
Here are the benefits of ordering ready made concrete:
- You only pay for the number of cubic metres you need
- You can tell us what ratios and grades you need
- You pick a time slot that suits you
When you order this type of concrete from HH Muckers, you save time and money. We deliver premium quality materials at a fraction of the retail cost.
How much does ready mix concrete cost?
Different ready mix concrete suppliers offer package prices.
At HH Muckers, we only charge you for the number of cubic metres you need. This means that you save money and waste less concrete.
Our prices start from £80 per cubic metre.
We offer guaranteed time slots. You never have to worry about missing deadlines when you order a ready mix concrete delivery from us.
Give us a call on 01992 635454.
How do you measure the strength of concrete?
It is important to ensure your concrete is strong enough. That goes for commercial, industrial, and residential construction projects.
This is where compression tests come in.
Scientists use specialist compression machines to measure the strength of concrete. They place samples inside the machine to be compressed.
Our contractors aim for between 15 MPa (2200 psi) and 30 MPa (4400 psi) strength concrete.
Your engineers and contractors can tell you what strength you need.
It is important to remember the strength of concrete depends on many factors. You must use high-quality materials and the correct water-to-cement ratio.
Are there quality standards for concrete?
There are quality standards for everything in the construction industry.
When building commercial, industrial, and residential structures, accuracy and safety are essential.
Our team are trained in the best industry practices.
They perform moisture, density, and void tests on our batches of ready mix concrete.
We conduct compressive strength tests to ensure the quality of our batches.
We make two of the most popular types of cement in our plant. Asphalt and portland cement are made using a process called inter-grinding.
Our local ready mix concrete Harlow specialists are happy to talk about our quality practices. Give us a call on 01992 635454.
How long do I have to place and finish the concrete?
When it comes to handling ready mix concrete, you must plan ahead.
It can become difficult to manage when subject to extreme weather conditions. Intense heat and immense wind can have a negative impact on your batch.
Contractors in Harlow can plan ahead with our guaranteed time slots.
It is important to start working when our volumetric concrete trucks arrive. Do not leave your batch of concrete for longer than you have to.
What is the difference between concrete and cement?
Concrete and cement are two different types of construction materials. They create strong, long-lasting structures.
Cement, water, sand, and gravel combine to make ready mix concrete. Cement is important for the hardening process.
We are a trusted ready mix concrete supplier in Harlow and the surrounding Essex areas. When you order from us, you can tell us the exact ratios and grades you need.
How do you measure concrete?
We measure ready mix concrete by cubic metre. One cubic metre weighs approximately 2.4T/m3.
Does concrete gain strength by drying out?
Concrete gains strength through a chemical process called hydration. Hydration happens when water combines with cement, sand, and stone.
Water molecules collide with the other molecules in the mixture. The materials aggregate as new bonds form.
When the water molecules form bonds, there is less moisture in the mixture. The concrete begins to dry.
Hydration happens throughout the entire lifecycle of concrete. As long as water is present, hydration occurs.
How long does it take for concrete to cure?
Curing concrete and drying concrete are two separate processes.
Whereas drying relies on hydration, curing concrete depends on many factors.
Contractors all over Harlow call us for curing advice. Our team understand that every project is different and can only provide general advice.
You must ensure that your relative humidity is above 80%. Maintaining a temperature of more than 50 degrees for 3 to 14 days is also important.
For more advice, call our local Essex specialists on 01992 635454.
What strength concrete is normally used for a slab under a house?
Our Harlow based clients use C35 grade strength for residential slabs.
Ready mix concrete is perfect for residential, commercial, and industrial construction projects.
We offer our contractors a range of strengths for different projects. Tell our team what materials you need when you make an order.
We always recommend speaking to your engineers and contractors for tailored information.
Why is my concrete cracking already?
Cracks are a naturally forming occurrence. They will appear throughout the lifecycle of concrete when moisture is present.
After concrete has set, hydration can still occur. It causes concrete to expand and shrink.
Concrete shrinks on average an ⅛ of an inch for every 20 feet.
Hydration is the main cause of excess cracks.
Some contractors add more water than necessary into their ready mix concrete to make it easier to work with.
We recommend you:
- Only add as much water as necessary
- Add expansion joints every 3 to 3.5 metres
- Do not work on the surface of your ready mix concrete before it is ready
Can I talk to someone about safety advice before the delivery?
Our local ready mix concrete Harlow team are only a call away.
We are always on hand to help. Our team can advise you about safety procedures, best practices, and logistics. Give us a call on 01992 63545.
How long will your ready mix concrete lorries be on our site?
There is no definite answer to this question.
Our volumetric concrete trucks stay on-site for a period of time that reflects the number of cubic metres you have ordered.
We are one of the only ready mix concrete suppliers that offer guaranteed time slots.
Our volumetric concrete trucks are pre-packed to your specifications. Your truck driver will arrive promptly, work quickly, and adhere to on-site safety standards.
Give us a call on 01992 635454 to order your ready mix concrete delivery.
Can you advise me on what type of concrete to order?
If you are ever unsure about ratios, grades, and types of concrete, contact your engineers and contractors.
Our team are happy to discuss general mixes on 01992 635454.
What is screed?
Screed is a thin, pliable material. Our concrete screed contains sand, water, and cement.
You can customise the mixture to suit your project. We will switch out the sand sizes on request. You can choose from small, minuscule pieces of sand or pieces that range from 6mm to 10mm.
The smaller the pieces of sand, the more pliable the mixture.
What can I use screed for?
HH Muckers’ floor screeding is good for a range of applications.
- Our screed creates flat, even surfaces. It is the perfect topper for uneven concrete subfloors.
- Because our screed creates smooth surfaces, it makes an ideal base for carpets, tiles, and linoleum.
- Screed is an affordable way to improve your home heating system. Simply pour it over your underfloor heating pipes, and watch your bills go down.
Are screed and concrete the same?
There is a lot of confusion because they share the same materials. The only difference is that our concrete also contains gravel.
Screed floors are not the same as concrete floors. They are much thinner and they have a smooth surface. Concrete floors are much thicker, and they have load-bearing qualities.
You might use a concrete subfloor to hold heavy beams, whereas you would use a screed floor to even out the surface of the concrete.
Order concrete screed in Harlow
If you are searching for concrete screed in Harlow, you are in the right place.
We supply residential and commercial project managers with high-quality screed. We mix all our batches, and can even create custom loads.
When you choose our service, you never have to worry about late deliveries. You can book a guaranteed time slot for your delivery.
Call 01992 635454 to book your screed delivery. Just tell us how many cubic metres you need and which time slot you want.
What types of floor screed do you sell?
At HH Muckers, we specialise in two types of floor screed.
Traditional screed is designed for contractors who want to create smooth, even surfaces. It makes a perfect base for carpet, linoleum, and other flooring options.
Reinforced screed is made from all the same materials as traditional screed, but it also contains metal mesh fibres. This type of screed is stronger, but it is also less likely to shrink and crack.
How to screed a floor?
Floor screeding does not have to be complicated. In fact, most people screed a floor with a simple trowel. Trowels are tools that feature a sturdy flat surface. They are available in any trade shop.
Just spread your screed and use the trowel to smooth out the surface. If you notice any trowel marks, you can use a carborundum stone. It will buff out any imperfections and create a blemish-free surface.
How do I cure screed?
When you are creating a screed floor, you need to leave time for curing. Curing allows screed to reach its full potential. Without this part of the process, your screed will not be strong enough to hold floors.
To cure screed, just wait. After seven days, screed reaches around 65% of its overall strength.
A lot of variables impact the cure time. Humidity, heat, and even the type of screed can all make a difference.
How long does screed take to dry?
HH Muckers’ concrete screed dries at a rate of 1mm per day.
If your screed layer is any thicker than 50mm, it will take longer to dry. You should account for an extra day for each 1mm over 50mm. For example, 90mm thick layers will take anywhere from 90 to 130 days to dry.
Can I cancel my order?
We know that issues outside your control can arise at any time. You can cancel your order up to 24 hours before your delivery slot by calling us on 01992 63545.
Contact HH Muckers
Call our friendly team for more information on 01992 635454 or fill in our online form.