Crushed Concrete across Hertfordshire, Essex & North London

One of the most common questions that contractors ask is 'where can I buy crushed concrete near me?' We supply crushed aggregates, concrete, limestone, and granite to contractors in London.

We offer our customers dedicated time slots. You can secure delivery for a time that suits you. We can supply MOT type same-day if it is pre-ordered where we can. Get an instant quote in 60 seconds to secure a slot - or call 01992 635454 if you'd rather talk it through.

There is no end to the number of uses for crushed aggregates. We sell lots of types of crushed materials. Crushed materials go into construction sites. It is important to understand the different uses and applications.

MOT Type 1 hardcore materials are perfect for sub bases. This type of MOT is perfect for car parks, motorways, driveways, and domestic and commercial structures. It is good for projects that need excellent load-bearing qualities.

Recycled MOT Type 1 also has excellent load-bearing qualities as regular MOT type 1. We also recommend it for construction projects. It is more affordable and eco-friendly than regular Type 1.

MOT Type 2 is good for drainage systems. This type of MOT is sometimes called Clean MOT because it does not contain dust particles. It is good for construction projects that would benefit from sturdy, permeable materials that do not contain dust particles.

Recycled 6F2 (which is also called 6F5) is used in bulk fill projects. It is an affordable alternative to primary construction materials such as limestone. 6F2 is ideal for driveways, car parks, and motorways.

The simple answer is yes.

In most cases, crushed concrete will compact over time. This applies to all types of MOT and the crushed aggregates that we stock.

Crushed materials are used for sub bases. When they are properly spread, compacted, and installed, they will harden and create a firm base. This is an important consideration for people who want to create driveways and formations. Contractors might have to add a few layers at a time and compact each layer to get the load-bearing qualities that they require. They might also have to add new layers every few years to maintain the desired requirements and levels.

One of the most common questions that customers ask us is, what is finer Type 1 MOT or Type 2 MOT?

It is important to understand the composition of your construction materials. Some types of MOT have a mixture of big and small chunks.

MOT Type 1 hardcore contains chunks of limestone and granite that range from 40mm to dust. The large chunks form a basis for strong structures, whilst the smaller particles fill the gaps. Once compacted, the materials create a strong base for structures.

Type 1 is finer than MOT Type 2. Typ e 2 is sometimes referred to as Clean MOT because it does not contain any particles.

Some construction projects require materials that drain at a faster flow rate than other materials. Another term for this is permeable. A material is permeable when water can pass through it. Concrete is solid cell material. However, it still pours to a degree. MOT crushed concrete is made up of lots of small chunks of concrete, which forms differently from poured ready mix concrete.

MOT Type 1 sub bases are not especially permeable, but they are not impermeable. This type of MOT contains a mixture of big and small particles. When the mixture is compressed to form a sub base, the small dust particles fill the gaps. The result is a very compact base.

It is much easier for water to travel through MOT Type 2 sub bases. Type 2 Clean does not contain particles. When Type 2 limestone or granite is compressed, there are small gaps throughout the materials. We recommend Type 2 for professionals who need bases that drain at a good flow rate.

Crushed concrete will harden, especially when builders compact and roll it for sub bases.

MOT Type 1 and Recycled Type 1 contain materials that range from dust to 40mm. The small particles fit into the remaining gaps and further harden the sub base.

It is important to note that crushed aggregates do not achieve the same hardness as ready mix concrete.

We create crushed concrete by grinding together quarried concrete and bricks from demolition projects. The materials that we source are tested in a laboratory. The tests that we conduct ensure the materials are suitable for use.

When we work with crushed concrete, particles are released into the air. We grind the pieces of concrete together. Our staff wear PPE to avoid exposure. Breathing in these particles can have a long-term impact on health. Our customers do not have to worry about exposure when they wear the correct PPE.

You can always speak to our team about health and safety concerns. Our lines are open to contractors, builders, and homeowners. Call us on 01992 635454 to ask about MOT Type 1, MOT Type 2, crushed concrete or any of the other types of aggregates that we sell.

A sub base is a compact, sturdy structure that goes underneath construction formations.

Most bases are made from crushed materials. Crushed materials strike a perfect balance between sturdiness and affordability.

For sub bases, you need to find a product that has both big and small materials. MOT Type 1 is a popular choice because it contains materials that range from dust to 40mm. Once the materials have been rolled into place, the sizes will slot together to form a compact base.

Sub bases exist to stabilise structures. They go underneath buildings, roads, and all kinds of other heavy formations. They act as a load-bearing layer and ensure that everything stays in place.

They can stop problems like channelisation. When cars travel over transport structures that have been laid incorrectly, ruts can occur. Strong bases can prevent this problem from happening.

If you need to create construction structures, the chance is that you need to create sub bases. Structures can be anything from buildings to motorways.

The main purpose of bases is to support structures. They bear massive weights and make sure that weight is evenly distributed. Without bases, structures will crumble and sag over time.

There are two types of sub bases: building bases and transport bases.

Building bases support sheds, patios, and houses. Transport bases support driveways, roads, and motorways.

MOT is the go-to choice for transport bases. These products gain their name from the Ministry of Transport. Years ago, this ministry managed transport networks all over the country. It is no longer active, but it lends its name to products that are suitable for transport bases.

MOT Type 1 is the perfect choice for this project. It contains crushed granite and limestone pieces that come straight from quarries. These materials are primary construction materials, and they have excellent load-bearing qualities.

Crushed concrete is another good choice for transport bases, but MOT products are always the first choice.

We collect materials from quarries and demolition sites. Materials from quarries tend to be more expensive because they have never been used before.

Materials that come from demolition sites are far more affordable. We scoop up chunks from old houses, buildings, and structures. The materials have been used before, and if we did not repurpose them they would be thrown away.

This is a common question from contractors.

We sell crushed materials by the ton. Our customers do not have to commit to buying large quantities of materials that they do not need. Contractors come to us because we will sell them the exact number of tonnes that they need.

We focus on crushed limestone, granite, concrete, and aggregates. They go into all sorts of construction tasks.

• Sub bases – We sell lots of batches of crushed materials for sub bases. All sorts of materials can go into bases. MOT, which contains limestone and granite, is a popular choice for transport bases. These primary construction materials have excellent load-bearing qualities, which makes them great for road bases.
• Drainage systems – Drainage systems do not necessarily need primary building materials, but they do need screened products. Screened products only contain one size, which means that they have high flow rates and are perfect for this kind of job. We recommend MOT Type 2 for this kind of construction project.
• Bulk-fill tasks – Bulk-fill tasks are as common as sub bases, but they do not need expensive materials. For this kind of task, most contractors buy crushed aggregates that come from demolition sites. Recycled 6F2 is a good choice because it contains aggregates that range from dust to 75mm.

This is a common construction term. It tells us how fast or slow liquids travel through materials or collections of materials. When we talk about flow rates, we are referring to entire batches.

For some construction tasks, you need materials that have certain characteristics.

If a product has a high flow rate, it means that liquids travel through the batch fast. The opposite is true of products that have low flow rates.

For sub bases, you need to choose a product that has a low flow rate. For drainage systems, you need a product that has a high flow rate. Screened products always have high flow rates because they only contain one size.

Like any hardcore material, crushed concrete can be dangerous. We sell lots of hardcore materials.

Here are some of the things to watch out for.

• Leachates – Any liquid that absorbs chemicals can become a leachate. Water can pass through crushed concrete, absorb alkalis, and become a leachate. Once it has formed, it can travel anywhere. It can spread to other areas on your site and cause chaos. You can avoid this problem by putting pH controls in place.
• Particles – When you move crushed materials, particles are displaced and become airborne. Airborne particles can travel anywhere, and can even be inhaled. If you inhale crushed concrete particles, you might develop lung issues. The fix is simple: wear a mask when you are on site.
• Strain – If labourers do not handle crushed materials in the right way, they could develop serious injuries. This is true of MOT Type 1, MOT Type 2, and all the other heavy hardcore materials we sell. The easiest way to avoid this is to minimise moving. We will deliver your materials exactly where you need them.

If you qualify for delivery you can choose a time slot and a date that suits you. Here is what you have to do to qualify.

• Your premises must be located in our delivery radius
• You need to have a suitable entrance
• You must order over eight tonnes of product

If you meet these requirements, we will do everything we can to streamline your delivery. At HH Muckers, we help contractors all over our coverage area meet important deadlines. Get an instant quote in 60 seconds to get the ball rolling and choose your delivery date - or call us on 01992 635454 if you'd rather talk it through.

Yes!

We help our customers through every stage of the process. You can ask us questions about anything, but especially health and safety.

We have been delivering construction materials for years, and we understand some of the common safety concerns. Whether you have a question about sourcing, handling, or delivery, we are happy to help.

Contact our team on 01992 635454 for more information.

Customers can cancel their orders if they give us 24 hours'notice.

Customers can cancel their orders if they give us 24 hours'notice.